How to Make Kratom Extract

make kratom extract

You can also learn how to make Kratom extract, the purest form featuring the highest concentration level of mitragynine and 7-hydroxymitragynine.

A Kratom extract can be obtained from the Kratom powders or leaves. And there are different ways to get it. Due to the variety of methods, Kratom extracts vary and have many types. Usually, on a commercial level, Kratom extracts are manufactured in labs with access to expensive equipment.

However, among customers who buy kratom capsules, powder, or leaves, some prepare Kratom extracts for different purposes. If you want to learn how to make Kratom extract, this post is all about it. Keep reading.

Kratom Extraction Methods

how are kratom extracts made easily

There are mainly three ways to prepare a kratom extract. Interestingly, each method will render a somewhat different potency of the alkaloids.

The first and easiest method is steeping Kratom in water. Mind you, don’t expect it to be highly concentrated. Then there are water-based extracts that offer mid-level concentration. However, resin offers the highest concentration, which is why it is the most difficult and expensive method.

What’s more interesting? There’s no standard. So, you have the liberty to manipulate a few things here and there, which will certainly make a unique impact on the Kratom extract. However, if you’re not sure of the consequences, you might end up ruining your Kratom powder.

So, it is absolutely vital to know how to make Kratom extract that doesn’t go to waste.

How Are Kratom Extracts Made – 3 Methods

Kratom Tea

As mentioned above, this is the simplest method of preparing a Kratom extract. In this process, you steep the Kratom in water, just like you make tea, which is probably the easiest way to access the alkaloids.

But you need to wait a little longer to see your tea getting more concentrated. Simply put, the more you concentrate (letting the excess water escape) the tea, the more authentic your Kratom extract.

Here, you can experiment with your extract by adding other types of Kratom strains. But make sure you add those before the water heats up.

Care must be taken not to reach the boiling point as Kratom alkaloids can break down. You don’t want to do that, do you?

Water-based Kratom Extracts

how is kratom extract made at home

Preparing tea is easy, but water-based extraction is not. Since you’re putting in more effort, your extract will come out more concentrated. So, what are the basic ingredients?

  • Raw Kratom leaves
  • Water
  • Ethanol (optional)

You need to dissolve the Kratom leaves in the solvent (either a mixture of ethanol-water or simply water). You know, you’re dealing with alkaloids, so you’ll have to add some acidic substance. Here, citric acid is the best.

After putting the Kratom leaves in the mixture, shake it vigorously and leave it in a dark spot. Kratom leaves normally take 1-2 weeks to dissolve in the liquid completely. When the Kratom leaves thoroughly dissolve in the solvent, strain the mixture.

You may need to apply heat so that the impurities and unwanted liquid evaporates, leaving a thick Kratom extract. However, you need to test the extract, making sure its pH should be around 4. You can keep it in a dark bottle.

Water-based extracts are quite common, although they’re more time-consuming and complicated than the Kratom-tea process. However, most Kratom extracts are prepared the same way, and sometimes, they add glycerin to neutralize the acidity.

Resin

In our list of how to make Kratom extract, the resin is the most concentrated extract. The result will be a semi-solid substance, which means you’re getting alkaloids, hands down.

You might be thinking, it’s going to take more than two weeks to finally grab a piece, but that’s not the case. To your surprise, resin takes less time than water-based extracts but is more complicated. Here’s how it goes:

Step 1: Add water into the Kratom powder, so much to cover it properly.

Step 2: While mixing the solution, add either of these in tandem: vinegar, lime juice, or lemon juice.

Step 3: Leave the mixture steep overnight.

Step 4: Allow the mixture to freeze so that it becomes solid.

Step 5: Next, pour the frozen Kratom into boiling water.

Step 6: Add some more vinegar, lime water, or lemon juice and let it simmer.

Step 7: When you notice that ¼ of the liquid has evaporated, allow it to cool.

Step 8: Strain the mixture and then leave it for a while so that half of it evaporates.

Step: 9: Now, you’re left with wet powder. Simmer it with water along with lime or lemon juice.

Step 10: Repeat step 9 one more time.

Step 11: When the liquid is saturated, you have to evaporate the remaining water in the oven. For this purpose,

  • Fill an oven-dish with the saturated liquid up to 3 inches
  • Set the oven’s temperature between 150-200 degrees Fahrenheit and let the water evaporate.

Step 12: Finally, the resin is ready.

Conclusion

Now, do you understand how to make Kratom extract? If you want to try any of these methods, you can buy Kratom leaves or powders from a wide variety of Kratom strains available at Green Leaf Kratom. We offer the best Kratom buy in all Kratom colors at a competitive market price.

We hope you’ll learn a great deal from this post. If you want to find more interesting posts, visit our Kratom blog.

how are kratom extracts made

Leave a Reply

Your email address will not be published.